Cambium Networks PMP 450m Access Point
Cambium Networks 450 platform adds Massive Multi-User MIMO capability with cnMedusa™ technology.
Our Price: $8,152.92
Click here to jump to more pricing!
Overview:
The PMP 450m Access Point is most scalable, highest capacity, and most spectrally efficient AP in the industry. cnMedusa is a first-of-its-kind technology in a fixed wireless broadband access platform. The 450m utilizes massive Multi-User MIMO technology in a cost-effective solution. The implementation of MU-MIMO coupled with beamforming technology delivers ground-breaking spectral efficiency and outstanding performance in high interference environments.
PMP 450m Massive 14 x 14 Multi-user MIMO System Features Adaptive Beamforming
PMP 450m Massive 14 x 14 Multi-user MIMO System Features Adaptive Beamforming
Combining Adaptive Beamforming and multiple RF chains can result in more than 4X total capacity compared to the standard 2x2 450i access point.
INTEGRATED 90° SECTOR ANTENNA ARRAY
Leading Edge antenna innovation brings Smart Beamforming to the 450 platform, ZERO RF cables to connect or weatherproof
MULTIPLE RF CHAINS
14 x 14 Multi-user MIMO system on the 5 GHz model allows simultaneous communication to up to seven SMs. 8 x 8 Multi-user MIMO system on the 3 GHz model allows simultaneous communication to up to four SMs
INDUSTRY-LEADING SPECTRAL EFFICIENCY
PMP 450m 5 GHz delivers >500 Mbps actual throughput in a 20 MHz channel (20+ bps/Hz, and over 40 bps/Hz when deployed in frequency re-use configurations).
WIDEBAND RADIO
5 GHz PMP 450b High Gain Subscriber Module
Key Features:
- cnMedusa™technology enhances sector capacity by
combining a smart beamforming antenna array with
multiple RF transmit and receive chains, effectively
multiplying available capacity by more than three times.
- Capable of throughput of over 550 Mbps in a 20 MHz
channel, and more than 1.2 Gigabit per second per
sector when using a 40 MHz channel.
- Multi-User MIMO more effectively uses available
spectrum by simultaneous transmissions to multiple
subscribers, increasing spectral efficiency to more than
60 bps/Hz.
- Protect your investment in the 450 platform equipment
by continuing to utilize existing Subscriber Modules
(all 450 platform subscribers work with the 450m and
cnMedusa technology, including prior generation 430
modules)
- Dramatically reduce the effect of interference in both
Uplink and Downlink with smart beamforming
- SFP port allows for greater deployment flexibility, and
AUX port allows for connection of camera or other PoE
directly.
- The Limited Version can reduce capital investment until
additional capacity is actually required. A 30-day trial of
MU-MIMO operation is included, and a simple license
key can permanently enable MU-MIMO operation when
needed.
Specifications:
ePMP Force 300-16 Specifications | |
---|---|
Spectrum | |
Channel Spacing | Configurable to 2.5 MHz channel spacing |
Frequency Range | 5150-5925 MHz |
Channel Width | 5, 10, 15, 20, 30 and 40 MHz |
Interface | |
MAC (Media Access Control) Layer | Cambium Networks proprietary |
Physical Layer | 14x14 Multi-User MIMO OFDM |
Ethernet Interface | 100/1000BaseT, full duplex, rate auto negotiated (802.3 compliant), SFP support up to 2.5NBase-T |
Protocols Used | IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP |
Network Management | HTTP, HTTPS, Telnet, FTP, SNMP v3 |
VLAN | 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID |
Performance | |
Subscriber Per Sector | Up to 238 |
ARQ | Yes |
Modulation Levels (Adaptive) | |
2X | MCS - QPSK Signal to Noise Required (SNR, in dB) - 10 |
4X | MCS - 16QAM Signal to Noise Required (SNR, in dB) - 17 |
6X | MCS - 64QAM Signal to Noise Required (SNR, in dB) - 24 |
8X | MCS - 256QAM Signal to Noise Required (SNR, in dB) - 32 |
Maximum Deployment Range | Up to 40 miles (64 km) |
Latency | 10 ms, typical |
GPS Synchronization | Yes, via Autosync (CMM5 or UGPS) |
Quality of Service | Diffserv QoS |
Link Budget | |
Antenna Beam Width (Azimuth) | 90° integrated sector (dual polarity, H+V, 3dB rolloff), 120° (6dB rolloff) |
Antenna Beam Width (Elevation) | 2° Electrical Downtilt, 8° Elevation Beamwidth and Null Fill down to -30° |
Maximum EIRP | + 48 dBm (or up to maximum allowed by regulation) |
Physical | |
Antenna Connection | Integrated Sector Array |
Surge Suppression (with LPU) | EN61000-4-5: 10/700us, 2 kV voltage waveform Recommended external surge suppressor: Cambium Networks Model # C000065L007C |
Mean Time Between Failure | >40 Years |
Environmental | IP67, IP66 |
Temperature | -40°C to +60°C (-40°F to +140°F) / 0-95% non-condensing |
Weight | Integrated - Approx. 14.2 kg (31 bs) |
Wind Survival | 124 mph / 200 kph |
Wind Loading - Front Facing | |
@90mph/144kmph | 376N |
@110mph/177kmph | 562N |
@124mph/200kmph | 780N |
Dimensions (HxWxD) | Integrated - 52 x 65 x 11 cm (20.3” x 25.7” x 4.4”) |
Power Consumption | 70 W typical, 80 W peak (up to 110 W max with AUX port PoE enabled) |
Input Voltage | 40 - 60 V DC |
Security | |
Encryption | FIPS-197 128-bit AES, Optional 256-bit AES |
Certifications | |
FCC ID | QWP-50450M (5.1, 5.2, 5.4, 5.8 GHz) |
Industry Canada Cert | 109A0-50450M (5.1*, 5.2, 5.4, 5.8 GHz) |
CE | EN 301 893 v1.8.1 + EN 301 893 v2.1.1 Clause 4.8 (5.4GHz) EN 302 502 v2.1.1 (5.8 GHz) |
Documentation:
Download the Cambium Networks PMP-450m Datasheet (.PDF)
Pricing Notes:
- Pricing and product availability subject to change without notice.
Our Price: $8,152.92